Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Prearrangements for Offline activation

#Prearrangement
1Make sure Sentinel LDK Run-time Environment is installed (hasplms.exe process is active). If not, install it manually.
2Make sure you have access (either physical or remote) to the target machine.
3Make sure the Sentinel HL key is connected (to the target machine), if you are using one.

Step 2. Consider your Product Key parameters

When you enter the CP, the information on your license order will be displayed, including the following parameters of your Product Key:

  • total number of Activations allowed for your license;
  • number of activations which are still available for you (Remaining Activations) and already performed (Previous Activations);
  • the list of available Features grouped into Products;
  • License Terms specified for each Feature;
  • permitted Lock Type (HL and/or SL).

Click Help (or the  button) for detailed description of the CP fields.

If you have activations remaining (see the Note 2), the Online Activation and Offline Activation buttons will be available.


Offline Activation


You have entered the CP from the computer where protected applications are NOT installed, but you need to generate a license for those applications (installed on another computer).


After you click on the Offline Activation button, the Generate License window will open.


1. Download the RUS utility, if you do not have one on your target machine yet. Transfer it to your target machine.


2. Generate a .c2v file with the help of RUS on your target machine (if you are not familiar with this procedure yet, see Step 1 of "Regular license update" page).


3. Transfer your newly generated .c2v file to the current machine (where the CP is accessed).


4. Upload the .c2v file in the Generate License window (via Upload C2V interface, see the figure below).


5. Click Generate to generate a .v2c file.


6. Save the obtained .v2c file to a location in your machine (the Download V2C File dialog box).


7. Transfer the .v2c file to the target machine.


8. Apply the .v2c file (for instruction, see Step 3 of "Regular license update" page).


Step 4. Verify the parameters of your newly updated license

After activation is successfully performed, the number of remaining activations will be decremented. If you no longer have available activations for this Product Key, the Online Activation and Offline Activation buttons will be hidden.

So, after you have applied your license, you can check the parameters of the new license key: Products, Features, Feature restrictions. This can be done in Admin Control Center web-application accessed from the target machine (see Note 3). 

For introduction to Admin Control Center, see "How can I view the properties of my license key?".


 

 

 

 

  • No labels